Hot Tap Kit K-2: 3/4"-2" Hot Taps

The Hot Tap Kit K-2 comes with everything you need to perform 3/4", 1", 1-1/2", and 2" hot taps through corp stops or any valve.

What's Included?

Complete DeWalt Drill

• (1) 20v DeWalt Drill
• (2) 2.0Ah Batteries
• (1) Battery Charger

Two Drill Rods

• (1) 13" Drill Rod for 3/4" and 1" Hot Taps
• (1) 18" Drill Rod for 1-1/2" and 2" Hot Taps

Eight Carbide Tipped Hole Saws for 3/4"-2" Hot Taps

Note: These hole saws are designed to perform several taps on PVC and Asbestos Cement. They are also capable of performing a few Ductile Iron taps. However, they are not designed to tap through hard steels such as Carbon and Cast Iron. Hole saws that are capable of tapping through harder steels are available for purchase on our online store.

• (2) 11/16" Carbide Tipped Hole Saw for 3/4" Hot Taps.
• (2) 7/8" Carbide Tipped Hole Saw for 1" Hot Taps.
• (2) 1-3/8" Carbide Tipped Hole Saw for 1-1/2" Hot Taps.
• (2) 1-3/4" Carbide Tipped Hole Saw for 2" Hot Taps

Eight Valve Adapters for Iron Pipe Size (IPS) and Copper Type Size (CTS) Threads

• (1) 3/4" CTS Adapter
• (1) 1" CTS Adapter
• (1) 1-1/2" CTS Adapter
• (1) 2" CTS Adapter

• 1-1/2" CM Adapter ( CTS Mueller)
• 2" CM Adapter (CTS Mueller)

• 1-1/2" IPS
• 2" IPS

Two Coupon Retaining Pilot Bits

• (1) Coupon retaining pilot bit for 13" Drill Rod.
• (1) Coupon retaining pilot bit for 18" Drill Rod.

DeWalt Carrying Case

• (1) DeWalt Carrying Case

Coupon Ejector

• (1) Coupon Ejector

Allen Wrench

• (1) Allen Wrench