K2 Additional Parts

The 13" Drill Rod is available with a threaded or hex end.  Black pilot bits are needed for the hex end.  Blue pilot bits are needed for the threaded end....

The 18" Drill Rod is available with a threaded or hex end. The hex end is only for 1-1/2" and 2" Hot Taps. The threaded end can be used for...

Complete with 4 o-rings and bronze bushing.

Includes Bronze Bushing and 4 O-Rings. Instructions: Step 1: Insert two O-Rings Step 2: Insert Bronze Bushing Step 3: Insert two O-Rings (The O-Rings will sit a few millimeters above...

Hex Adapters The small hex hole saw adapter is needed to attach 11/16" (for 3/4" taps) and 7/8" (for 1" taps) hole saws to 13" drill rods that have a hex tip....

Hex tool for removing pipe coupons from the hole saw after the tap.

Used for the removal of hole saws and pilot bits.